hplip (1.6.10-3) unstable; urgency=high

  * dpatch 00_01_upstream-fix-libusb-bigendian (new): Do not hto* libusb
    stuff, it does so by itself (at least on the non-ancient versions),
    backport from upstream 1.6.12-rc3 (closes: #401530)
  * dpatch 00_02_upstream-fix-pragma-pack (new): Do not use pragma pack, use
    attribute packed instead, backport from upstream 1.6.12-rc3

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon, 18 Dec 2006 10:27:31 -0200

hplip (1.6.10-2) unstable; urgency=low

  * debian/control: hpijs: Add versioned replaces on hpijs-ppds, hplip-ppds
    for Fax PPD file move into hpijs package, that happened on 1.6.10-1
    (closes: #395862, #395847)
  * debian/control: build-depend on patch >= 2.5.9-3bpo1 due to our use
    of the Debian-specific -U flag for dpatch, introduced by
    2.5.9-4/2.5.9-3pbo1; build-depend on findutils >= 4.2.25 due to our use
    of xargs -d.  Thanks to Sylvain Beucler <beuc@beuc.net> for noticing and
    reporting these problems

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sat, 28 Oct 2006 09:14:09 -0300

hplip (1.6.10-1) unstable; urgency=medium

  * New upstream source (closes: #393940, #395165)
    * HPLIP 1.6.10:
      + Fixed defect: hp-print and hp-sendfax: an error occurs while
        executing hp-print with invalid device URI or the printer name
        in CLI
      + Removed batch scanning sane_cancel dependency.  This fixes a
        problem with scanimage version 1.0.18 or higher
        (closes: #382648, #382652)
      + Fixed defect: GUI Install - hp-setup - Does Not Finish
      + Added icons to toolbox function page buttons
      + Added make copies support for some inkjet AiO devices
      + Added hp-timedate utility
      + Simplified some text in hp-setup -u
      + Fixed defect: the Timeout value for searching printer shouldn't
        be able to set as value larger than 45 secs in HP Device Manager
      + Made GUI mode the default for hp-setup
      + Fixed defect: error occurs while manually finding the network
        printers in HP Device Manager
      + Made the "Find" button on the Manual Find dialog the default
        button
      + Added "Setup New Device..." in Toolbox
      + Added "Remove Device..." in Toolbox
      + Reworked "No Devices Found" dialog
      + Fixed defect: Multi PPD files were found while installing the
        Photosmart D5160 through hp-setup
      + Fixed defect: hp-setup -u default window size needs to be a tad
        larger
      + Fixed defect: hp-setup -u par device detection problem
      + Fixed defect: the "Location" and "Description" for Fax Information
        also should be available while setup the device over hp-setup in
        GUI mode
      + Added additional fax name and printer name checking
      + Fixed defect: hp-setup -u manually find usb device not manually
        working
      + Fixed defect: hp-setup -u Location/Desscription text field limits
      + Fixed defect: hp-setup -u help button does not function
    * HPIJS 2.6.10:
      + Added support for the following new printer(s)
        + LaserJet P2015 series (LJMono/PS)
        + LaserJet M3035 MFP (LJMono/PS)
        + LaserJet M5035 MFP (LJMono/PS)
        + LaserJet M4345 mfp (LJMono/PS)
        + LaserJet P3005 (LJMono/PS)
        + LaserJet P3004 (LJMono/PS)
        + Color LaserJet 2700 (PS)
        + Color LaserJet CM1015 (PS) (no scanning yet)
        + Color LaserJet CM1017 (PS) (no scanning yet)
  * dpatches 50_ui-supportform-cleanups, 55_ui-supportform-debian (remove):
    these patches were already disabled, and we are not going to enable them
    back anytime soon anyway
  * hplip.links: ship link for hp-timedate
  * Makefile.am: fix borked install-exec-hook that broke libsane-hpaio
    install (borkage added by upstream on 1.6.9), thanks to Matthias Klose
    for forwading the bug report from Ubuntu
  * debian/rules: correct paths to platform.h and auto-include.h, thanks
    to Matthias Klose from Ubuntu
  * debian/rules, debian/control: do the proper thing for binNMU safety,
    and also simplify the various package relationships as much as we can:
    hpijs-ppds: now depend on hpijs (versioned >=).  hpijs: remove conflicts
    with non-compatible ppd packages, and version suggests on hpijs-ppds
    strictly.  hplip-dbg: depend strictly on the version of hplip and hpijs
    the debug symbols came from.  hplip: suggest hpijs and hpijs-ppds with
    >= version.  This does allow the user to do stupid things if he really
    wants, but given the ammount of arch any/all mixes in this set of
    packages, attempting to get it perfect only causes headaches while
    upgrading (and it is also nearly impossible)
  * hplip.init: tell user to reinstall hplip if the statoverrides are
    missing (closes: #393271)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Thu, 26 Oct 2006 13:22:56 -0300

hplip (1.6.9-1) UNRELEASED; urgency=low

  * New upstream source
    * HPLIP 1.6.9:
      + Fixed defect: Printer supplies listed in "random" order
      + Fixed defect: Don't report hpfax:/no_devices_found in CUPS 1.2
      + Fixed network printer detection (SLP)
      + Added hp-probe back
      + Fixed defect: The HP Fax URI could not be showed if executing
        hp-makeuri with parameter "--fax" in the terminal
      + Fixed defect: The "Add to List" button for Coverpage would be
        grayed out after sent a fax job including Coverpage
      + Fixed defect: An unexpected error occurred when add a FAB entry
        using the space as the fist character of the entry name
      + Made some misc. input validation improvements to hp-fab -i
      + Changed print code so that it can use lpr or lp depending on
        what is installed (lpr=default)
      + Fixed defect: hp-unload only works with ASCII char's
      + Fixed defect: hp-unload gives incorrect permissions bits.
        hp-unload will save files with permissions of 0600.
      + Fixed a laserjet scanning problem in hpiod
      + Changed the 1284.4/MLC setup command for CLJ2840/LJ3050/LJ3055
      + Cleaned up PML errors occuring on DJ 4xx when doing dynamic
        counters
      + Fixed status-dynamic-counters value for DJ 460
      + Fixed defect: Toolbox cannot be launched successfully after setup
      + Added code to cleanup spinner from text UIs
      + Fixed defect: The fax job could not be sent while sending fax in
        non-interactive mode
      + Fixed defect: The value of Notes for an FAB entry cannot be
        displayed correctly while the entry was added completely in
        interactive mode
      + Fixed defect: An error occurs while executing hp-sendfax in
        non-interactive mode with the device disconnected
      + Fixed defect: The .g3 file could not be added to the Items List
        and could not be sent
      + Fixed defect: The fax job could not be sent in non-interactive mode
      + Added scan-style and fit-to-page fix to hp-makecopies
      + Added scaling=100 to hp-sendfax.
      + Moved Qt import in hp-toolbox and hp-print to after command line
        processing
    * HPIJS 2.6.9:
      + Added support CD/DVD label printing (ie: PS D5100)
      + Added support for the following new printer(s)
        + PhotoSmart A310 series (DJGenericVIP)
        + PhotoSmart C5100 series (DJGenericVIP)
        + PhotoSmart C6100 series (DJGenericVIP)
        + PhotoSmart C7100 series (DJGenericVIP)
        + PhotoSmart D5100 series (DJGenericVIP)
        + PhotoSmart D5060 series (DJGenericVIP)
        + PhotoSmart Pro B8300 series (DJGenericVIP)
  * debian/control: change -dbg package to priority extra, and place
    hplip-ppds on section utils (to match ftp-master override file)
  * Disable new libhpprop dynamic loading in hpijs ljjetready driver,
    until we know for sure what it is and the code is fixed not to break
    strict aliasing rules (and to use libtool)
  * Fix some real and some cosmetic issues with the new Makefile.am and
    configure.in files from upstream
  * hplip.links: add hp-probe
  * control: recommend both hpijs and linuxprinting.org PPD packages,
    not just one or the other for package hplip
  * hpijs: ship fax PPD in the hpijs binary package, and not in the
    catch-all hpijs-ppds package.  The reason for this is that many printers
    need hpijs only for the fax functionality
  * hplip.README.Debian: mention faxing, hpijs and python-reportlab for
    covers

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon,  2 Oct 2006 16:25:00 -0300

hplip (1.6.7-2) unstable; urgency=low

  * Transition to python 2.4, just rebuild (closes: #380845)
  * Add python post-rtupdate handler to restart hplip, just in case

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue, 15 Aug 2006 00:35:27 -0300

hplip (1.6.7-1) unstable; urgency=low

  * The "I could easily start hating python because of them" release
  * New upstream source (closes: #378401, #377265)
    * HPLIP 1.6.7:
      + Changed from dynamic IP ports to static IANA IP ports for hpiod
        (2208) and hpssd (2207)
      + Fixed defect: the valid letter and number for gray plot could not be
        entered while executing hp-colorcal in terminal
      + Fixed defect: the fax job could not be sent in non-interactive mode
      + Move test page to last function with hp-setup
      + Fixed defect: hp-setup would not select correct ppd file for some
        models
      + Removed Uni-di check code from device.Device.__openChannel()
      + Fixed a problem that caused the fax wrong configuration error to
        appear in error
      + Fixed defect: the interactive and GUI mode for hp-fab can be entered
        while executing hp-fab with parameter -i and -u
      + Fixed defect with DeskJet 5540: traceback during align click from
        toolbox
      + Added non-interactive mode (-n) to hp-sendfax
      + Added interactive mode (-i) to hp-fab.
      + Fixed defect: the reduction was set to 25% automatically while
        setting the Reduction/enlargement override 25-400%.)
      + Added hp-makecopies
      + Fixed defect: CUPS 1.2 does not auto-associate the PPD file to the
        fax URI
    * HPIJS 1.6.7:
      + Added support for the following new printers:
        + Photosmart D6100 series (DJGenericVIP)
        + Photosmart D7100 series (DJGenericVIP)
  * dpatch 00_01_upstream-1.6.6-1.dpatch (remove): applied upstream
  * dpatch 20_fix_warnings (remove): accepted upstream
  * dpatch 60_lp_instead_of_lpr (remove): accepted upstream
  * Python policy changes (closes: #380845):
    + Build-depend on debhelper (>= 5.0.37.2), python-support (>= 0.3)
    + Add debian/pycompat with a content of "2"
    + Call dh_pysupport in debian/rules, and move dh_installinit after
      it for postinst scriptlet sanity
  * hplip.init: Make sure to set permission of hpssd files in case the user
    changed the suid/sgid information (closes: #372537)
  * debian/control: remove redundant python build-dependency, as we have
    python-dev already
  * hplip.links: remove link for hp-photo, as that utility does not exist
    anymore; add new hp-makecopies utility
  * Makefile.am: ship copier/ stuff in libexecdir
  * debian/rules: make sure we point to the hplip-doc package in hplip.conf

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed,  9 Aug 2006 14:26:00 -0300

hplip (1.6.6-1) UNRELEASED; urgency=low

  * The "it is just a number, after all... or is it?" non-release
  * New upstream source
    + HPLIP has reached maturity, with an 1.x release
    + Switch versioning scheme for hplip and hpijs
    + CUPS 1.2 compatibility
    * HPLIP 1.6.6 (patchlevel 1):
      + Fixed broken links in HTML documentation
      + Added DOT4Init retry in hpiod. This fixed a intermittent scanning
        problem with the HP PSC 3100
      + Changed libsane-hpaio to display any received scan data after I/O
        timeout instead of aborting
      + Fixed the File Types that can be directly added to the fax job could
        not be displayed accurately on Send Fax dialog
      + Added 30sec retry and timeout to hpfax
      + Added CUPS 1.2 compatible output to hpfax
      + Removed DeviceOpen from hp backend. This fixes two problems 1) usblp
        will no longer be removed for device discovery 2) device discovery
        will no longer cause Inkjets to power-up (closes: #369286)
      + Changed hp backend device discovery verbage in order to work better
        with CUPS 1.2
      + Fixed status-types for 2006-09 devices (5 --> 2)
      + Fixed panel display for older OfficeJets that have VSTATUS
      + Fixed "no printers installed, run toolbox, install printer, toolbox
        produces error" bug
      + Updated hpfax to "No devices found" text and behavior
      + Removed extraneous syslog message during parallel port ProbeDevice
      + Rewrite of toolbox refresh code. Should fix long running issue
      + Fixed HP-Toolbox no activity after an hour causes toolbox to
        disconnect from all printers
      + Fixed the Job ID for fax job should be displayed in Status tab of
        toolbox while starting fax send
      + Modified XML schema (and all XML files to comply with it) -
        status-type broken out into status-type, status-battery-check, and
        status-dynamic-counters
      + Made hplip_GetID more bullet proof in hplip_api.c
      + Fixed invalid memory free in libsane-hpaio. Only occurred in the
        sane_hpaio_open abort path
      + Changed 1284.4/MLC credit reply timeout from 2 to 4 seconds in
        hpiod. This fixed a problem with 1200dpi uncompressed scanning (ie:
        PhotoSmart 2575)
      + Removed support dialog (should have been removed in 0.9.11, was
        missed)
      + Changed Tools and Support pane to include "View Documentation"
        rather than "View Support" - opens online docs in browser like
        Help | Contents...
      + Added sane hpaio.desc file to documentation
    * HPIJS 2.6.6:
      + Fixed an auto duplex problem in HPIJS
      + Fixed gcc 4.1 compiler issues with HPIJS glue code
      + Added support for the following new printers:
        + Deskjet D4100 series (DJ4100)
        + Deskjet D2300 series (DJ3600)
        + Deskjet D1360 series (DJ3320)
        + Photosmart A430 series (DJGenericVIP)
        + Photosmart A510 series (DJGenericVIP)
        + Photosmart A710 series (PSP470)
        + Photosmart A610 series (PSP470)
        + Photosmart C4100 series (DJGenericVIP)
        + Photosmart C3100 series (DJGenericVIP)
        + Photosmart D7300 series (DJGenericVIP)
      + Updated the Ghostscript KRGB patch: Revisited the KRGB buffer
        overflow issue with out-of-band data in fill_rectangle and
        copy_mono.  Changed the fill_rectangle and copy_mono to an inner
        loop buffer check instead of a outer loop x/y extent check.
        As requested by Ralph Giles, added K 1-bit (KRGB) and 8-bit (KxRGB)
        support for KRGB, but only 1-bit is implemented for now
  * hpijs-ppds: depend on foomatic-filters as the PPDs require foomatic-rip
    to work.  Version dependency to a new enough foomatic-rip (available in
    stable as well, so this is not strictly needed, but still...)
    (closes: #369833)
  * hpijs: drop suggestion on foomatic-filters, hpijs doesn't use it for
    anything anyway, and the PPDs (who do) now depend on it
  * hplip: recommend one of hpijs-ppds or linuxprinting.org-ppds instead of
    suggesting both.  HPLIP really needs a PPD to do anything useful
  * Improve description of the hplip-dbg package a little
  * debian/watch: remove outdated URIs, update to version 3
  * dpatch 00_01_upstream-0.9.11-2 (remove): applied upstream
  * dpatch 00_01_upstream-1.6.6-1 (new): upstream HPLIP 1.6.6-1
  * dpatch 40_quiet-hpiod (remove): accepted upstream
  * dpatch 60_lp_instead_of_lpr: rediff
  * dpatches 50_ui-supportform-cleanups, 55_ui-supportform-debian (disable):
    upstream removed the supportform, but we may want to add those panes
    somewhere else so just disable the patches for now
  * dpatch 20_fix_warnings (new): fix broken code in hpijs that caused
    warnings
  * Remove old KRGB 1.2 patches

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Fri, 16 Jun 2006 18:44:55 -0300

hplip (0.9.11-2) unstable; urgency=low

  * dpatch 00_01_upstream-0.9.11-2 (new): HPLIP 0.9.11-2
    + Fixed an intermittent auto duplex problem with HPIJS 
      (closes: #360017)
    + Add some missing PSC 950 model entries in models.xml
    + Fixed some NDEBUG compiler issues (Debian)
    + Fixed some gcc 4.1 compiler issues (Debian)
  * dpatch 20_fix-asserts (remove): accepted upstream
  * dpatch 30_gcc4.1-fixes (remove): accepted upstream
  * dpatch 50_doc-location (remove): superseeded by dpatch
    50_ui-supportform-cleanups
  * dpatch 50_ui-supportform-cleanups (new): Remove useless README pane
    in hp-toolbox support form, fix the URIs to have ending slashes, and
    some other cosmetic fixes
  * dpatch 55_ui-supportform-debian (new): Add Debian pane to hp-toolbox
    support form

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Fri, 12 May 2006 23:40:38 -0300

hplip (0.9.11-1) unstable; urgency=low

  * The "Eating hedgehogs ain't smart" release
  * New upstream version:
    * HPLIP 0.9.11:
      + Changed hp-sendfax behavior: Now hp-sendfax must be run before
        print jobs can be printed to a fax queue
      + Completely revamped the email alert system (now uses sendmail
        rather than a SMTP server)
      + Changed hpssd so that it will not send an email if the same device
        has the same error code multiple times in a row
      + Changes auto device refresh interval units from seconds to minutes
        in the hp-toolbox
      + Added a device auto refresh type (all or 1) to settings dialog in
        the hp-toolbox
      + Replaced hplip_readme.html with web documents available at
        hplip.sf.net
      + Moved the DeviceClose in the hp-toolbox testpage routine to before
        the lpr to fix an issue with contention with the "hp" backend
      + Fixed a defect in hp-fab that didn't allow previously added
        entries to be modified
      + Added better error checking to hp-sendfax to detect HPLIP daemons
        not running
      + Fixed LJ2840 network port for faxing in hpiod
      + Turned status off for all Business Inkjets 2200-2600
      + Moved fax address book file from ~/.hplip.fab to ~/hpfax/fab.db
      + Changed hp-fab so that duplicate entries cannot be created
      + Fixed endianness issue that hosed the HP Color LaserJet 3500 on
        PPC (closes: #317683)
    * HPIJS 2.1.10:
      + Moved PSC 21xx from DJGenericVIP to DJ9xxVIP device class
        (this requires all PSC 21xx users to update their PPDs)
      + Forced hpijs and hppgsz to always build with -DNDEBUG
      + Merged hpijs_readme.html into hplip documentation
      + Added support for the following new printers:
        + LaserJet 5200 (LJMono/PS)
        + LaserJet 5200L (LJMono/PS)
        + Color LaserJet 2605 (PS)
        + Officejet 6300 series (DJGenericVIP)
        + Officejet 4300 series (DJ3320)
  * dpatch 00_01_upstream-0.9.10-2 (remove): applied upstream
  * dpatch 00_01_upstream-0.9.11-1 (new): preliminary upstream patch:
      + Fix regression where the PSC 950xi stops being detected
        (reported by Till Kamppeter)
  * dpatch 14_charsign_fixes: remove hunk applied upstream, rediff
  * dpatch 60_lp_instead_of_lpr: update for new upstream code
  * dpatch 20_fix-asserts (new): fix bugs that show up on NDEBUG builds
  * dpatch 30_gcc4.1-fixes (new): fix strict aliasing bugs for gcc 4.1
  * Ship the new HPLIP/HPIJS documentation in a new arch-all package,
    hplip-doc.  The hplip and hpijs packages now have just Debian
    documentation, and point to the hplip-doc package (or to the
    online URI for that documentation) for the full user manual
  * Add a users-guide.txt file to hplip and hpijs documentantion,
    to point users to the hplip-doc package and to the online manual
  * Bump standards version to 3.7.2 (no changes required)
  * Drop support for initscript systems without invoke-rc.d, as
    invoke-rc.d is now required per policy.  This also shuts lintian
    up, which is always a nice bonus
  * hpijs.NEWS, hplip.NEWS: update for the new release
  * hpijs.README.Debian: minor cleanup, and point users to hpijs-ppds
  * hplip.README.Debian: minor updates and cleanup
  * debian/control: Make hplip automatically recommend the newest
    hpijs upstream version, instead of a manually set one I am not
    always really sure about
  * debian/rules: Provide hpijs:Source-Version as well for the control
    file
  * Add new hplip-dbg package with full symbolic debugging information for
    all binaries and libraries generated by this source package
    (closes: #366766)
  * debian/control: place hpijs and hpijs-ppds on section text (as per the
    override file for hpijs, and other -ppds packages)
  * Ship doc/release_notes.html as the upstream changelog, as the old
    text changelog is not being updated anymore by upstream

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Thu, 11 May 2006 12:56:38 -0300

hplip (0.9.10-1) unstable; urgency=low

  * New upstream version
    * HPLIP 0.9.10 (patchlevel 2):
      + Made the "hp" backend more product specific, now HP USB keyboards
        won't be misdetected as printers....
      + Fixed jetdirect write timeout in hpiod
      + Added deviceID to output of "hp" backend for CUPS 1.2
      + Fixed a problem where no fax send dialog pops up when sending
        a fax job from OpenOffice Writer and the fax job can not be sent
        correctly
      + Fixed a hp-setup crash which can occur during fax setup testpage
        printing
      + Modified the hp-toolbox and hp-print so that they will work with
        unsupported printer models without crashing
      + Hp-setup now allows the user to manually enter a PPD file path
      + The "NickName" from each located PPD file is displayed to the user
        so that the "(recommended)" text will be shown.
      + Fixed an error which occurs while executing hp-sendfax with
        b parameter.
      + Fixed a hp-toolbox problem displaying cartridge information for
        Photosmart 8700 when device is connected via network
  * dpatch 00_01_upstream-0.9.10-2 (new): upstream patchlevel 2
    + Drop useless (and broken) model test comparison (closes: #360385)
    + Fix local DoS when usb communications get stuck
  * dpatch 14_charsign_fixes: add new hunks to fix more sign problems
  * Replace all instances of the old upstream hopepage (hpinkjet.sf.net)
    with the new one (hplip.sf.net)
  * Point users to the new upstream mailinglists
  * Add watch entries for the renamed sourceforge project

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon, 24 Apr 2006 12:57:59 -0300

hplip (0.9.9-2) unstable; urgency=low

  * configure.in, Makefile.am, debian/rules, prnt/hpijs/configure.in:
    fix /etc/hp/hplip.conf ppd dir setting, thus unbreaking hp-setup
    and remove useless cruft re. PPD dir setup while at it (closes: #358719)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Fri, 24 Mar 2006 21:22:17 -0300

hplip (0.9.9-1) unstable; urgency=low

  * New upstream version
    * HPIJS 2.1.9:
      + Fixed an array index underflow in ljfastraster.cpp
      + Save paper width and height in UXServices object after a call to
        SetPaperSize
      + When fullbleed printing is requested, if printer supports it,
        return actual paper dimensions for PrintableArea
      + Added support for the following new printer(s):
        + HP DeskJet F300 Series All-in-one (DJ3600)
    * HPLIP 0.9.9:
      + HPLIP now uses libusb for all USB I/O.  Libusb replaces kernel
        modules printer and usblp, and opens an entirely new can of worms
      + Removed support for USB URIs based on device files.  This means all
        printers now use USB URIs based on "hp:/hp_model?serial=xxxxxxxx"
        instead of "hp:/hp_model?device=/dev/usb/lpx".  Old CUPS queues must
        be updated to the new device location
      + Added full USB 1284.4 support for the Color LaserJet 2840, and for
        LaserJets 3050, 3060, 1010, 1012, 1015 and 2500
      + Updated HP-Fax-hplip.ppd to be in conformance with CUPS 1.2
      + Updated most LaserJet PPDs for CUPS 1.2
      + Changed the GetSnmp timeout from 5 to 2 seconds in hpiod
      + Fixed incorrect supplies information for Color Laserjet 2840
        displayed in hp-toolbox
      + Fixed problem where title input was of no use while adding a file to
        item list in send fax dialog
      + Add models.xml parallel port flag for Deskjet 5550
      + Moved hp-sendfax temp .g3 files to ~/hpfax/hpfax-*.g3.  Before,
        they would clutter the user's home directory
      + Files added to hp-sendfax interface are now rendered into g3 format
        as they are added to the batch
      + Removed temporary file creation from hpfax: (temp files now created
        only by hp-sendfax using mkstemp)
      + Added total page counting feature to hp-sendfax
      + Added a BSD license to magic.py
  * debian/control: build-depend on libusb >= 0.1.8
  * dpatch 00_01_upstream-0.9.8-4: remove (applied upstream)
  * dpatch 60_lp_instead_of_lpr: rediff to remove skips
  * dpatch 40_quiet-hpiod: rediff to remove skips
  * dpatch 01_rss: rediff to reorder file hunks
  * dpatch 30_no-ping: remove, upstream removed icmp functionality
  * dpatch 70_sane_ppd_directory_handling: remove (applied upstream)
  * dpatch 45_quiet_hpijs-fax: remove (applied upstream)
  * dpatch 35_no-fax-setuid: remove, upstream now does seteuid()/setegid()
    only if sendfax is being run as root
  * dpatch 10_shebang_fixes (new): new dump place for #!<interpretor> fixing
  * hplip.menu: s/hp-fax/hp-sendfax/
  * debian/control, debian/compat: switch to debhelper mode V5
  * debian/control, debian/rules: provide and use hpijs:Upstream-Version,
    rename Upstream-Version to hplip:Upstream-Version
  * Rename hplip-ppds package to hpijs-ppds, update all documentation to
    point to hpijs-ppds and linuxprinting.org-ppds and add a hpijs.NEWS
    entry about the package rename as well
  * debian/control: conflict hpijs with hplip-ppds versioned to source
    version, as a dirty trick to not clash with hpijs-ppds providing
    hplip-ppds
  * debian/rules, debian/hpijs-ppds.install, debian/hpijs-ppds.links,
    debian/hpijs-ppds.NEWS:
    Don't ship non-hpijs PPDs anymore, linuxprinting.org-ppds takes care
    of the pure postscript PPDs now
  * debian/rules: version hpijs-ppds the same way we version hpijs
  * debian/control: suggest hpijs-ppds and linuxprinting.org-ppds for hplip
    instead of recommending the old hplip-ppds package.  Recommend hpijs
    with fax support for hplip. Remove conflict on foomatic-db-hpijs and
    foomatic-filters-ppds from hplip.  Conflict hpijs-ppds with
    foomatic-filters-ppds before 20060113-1 when the PPD duplication was
    removed from foomatic-filters-ppds
  * debian/control: rework package descriptions a little
  * debian/rules: ship all PPD files compressed
  * debian/rules: separate arch-dep and arch-indep install, to avoid wasting
    a great deal of time on slower archs gziping PPDs
  * hplip initscript: Run hpiod as root because of libusb
  * debian/copyright: update dates

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sun, 19 Mar 2006 23:32:57 -0300

hplip (0.9.8-1) unstable; urgency=low

  * This release was not uploaded to Debian
  * New upstream version
    * HPIJS 2.1.8 (patchlevel 4):
      + Moved OfficeJet 6100 and 6150 to DJ55xx.h; margins on these devices
        are same as those on DJ5550
      + Added support for the following new printers:
        + HP LaserJet 3050 (LJMono/PS)
        + HP LaserJet 3060/3062 (LJMono/PS)
        + HP LaserJet 3390/3392 (LJMono/PS)
        + HP Deskjet 6980 series (DJGenericVIP)
        + HP Deskjet 6940 series (DJGenericVIP)
      + Updated KRGB patches to version 1.2:
        + Fixed krgb buffer overflow issue with out-of-band data in
          fill_rectangle and copy_mono. This buffer overflow condition
          occurred with fullbleed print jobs that had k-band images
        + Added Dan Coby's (artifex) fix for gsijs_read_string_malloc
          gs_free *str memory leak.
    * HPLIP 0.9.8 (patchlevel 4):
      + Added send fax support (still quite rough)
      + Added HP Setup utility
      + Fixed deviceid zero termination issue in hplip_api.c
      + Enhanced the status history table in hp-info
      + Changed device list in toolbox to use small icons for status overlay
      + Modified models.xml file to add pen info back to OJ5500 and disable
        front panel
      + Removed probe.py from distribution
      + Added Fax URI generation to hp-makeuri
      + Fixed hp-makeuri so that it would not report URIs for non-existent
        functions
      + Fixed hp-makeuri quiet modes that they are actually quiet
      + Added a new chooser dialog that presents a list of CUPS queues
        rather than device URIs (hp-sendfax, hp-print)
      + Fixed a hpiod problem with the PS 2570 series. This will fix the
        scanning blue-screen error with USB High Speed
  * dpatch 00_01_upstream-0.9.8-4 (new): 0.9.8 patchlevel 4
  * hplip package: recommend python-reportlab for fax cover page support
  * Instead of modifying the PPD manufacturer tag from HP to HP (HPLIP),
    now append HPLIP and the upstream version to the nickname
    (closes: #347264)
  * Ship hpijs PPDs in /usr/share/ppd/hpijs/<PPD Manufacturer> as per
    the Debian PPD file structure specification.  Ship the pure postscript
    PPDs in /usr/share/ppd/hplip-postscript, for now
  * Normalise case and start all HP PPD file names with "HP-"
  * debian/control: Remove foomatic-db-hpijs from suggests and
    recommends, as it will go away
  * Update READMEs and NEWS files for the above PPD changes, add NEWS
    file for hplip-ppds while at it
  * Update hplip's README for hp-setup
  * Mention that the RSS patch is stale in hpijs' README
  * Removed patch already applied upstream: 00_01_upstream_0.9.7-2
  * dpatches 30_no-ping, 50_doc-location, 60_lp_instead_of_lpr: rediff
  * Let configure detect all standard paths for CUPS, except for the
    PPD path
  * Prune non-shipped-files.txt, and change debian/rules to tell us
    which files were removed instead of doing it silently
  * dpatch 70_sane_ppd_directory_handling (new): modify hplip to
    look for PPD files under /usr/share/ppd/hplip, instead of
    searching the entire CUPS PPD tree (used by hp-setup)
  * Add menu entries for hp-print, hp-sendfax and hp-fab
  * Add HPmenu.xpm icon
  * dpatch 35_no-fax-setuid (new): change hpssd fax queue function
    not to setuid(), as we don't run as root.  This limits sending
    faxes somehow, but the impact is not clear to me yet.  Bug reports
    welcome
  * dpatch 45_quiet_hpijs-fax (new): remove noisy hpijs debug output in
    the fax driver
  * debian/control: rework package descriptions, mention fax support
  * Ship KRGB patches cleaned up and tailored for Debian's gs versions
  * Update debian/copyright for new directories, mention license of KRGB
    patches (MIT)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon,  6 Mar 2006 16:43:08 -0300

hplip (0.9.7-4) unstable; urgency=low

  * New upstream 0.9.7-2 patch: fixes for the following problems:
    + Photosmart 2570 series blue screen scanning error
    + GetDeviceStatus overwrite in hpiod (from RedHat)
    + SuperB margin issue with OJ K550, OJ K850 and DJ9800
    + _GNU_SOURCE define in hpaio.h. (from RedHat)
  * Remove versioning of python-qt3 and pyqt-utils build-dependencies to
    make backports easier.  Current versions in stable, testing and sid
    are safe AFAIK
  * Build-depend on libsnmp9-dev|libsnmp5-dev, to ease sarge backports

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed,  7 Dec 2005 14:05:12 -0200

hplip (0.9.7-3) unstable; urgency=low

  * Switch from two versioned conflicts to two versioned depends/recommends
    to encode the relationship between hplip and hplip-data.  This is
    easier on apt, since conflicts preclude unpack, while depends preclude
    configure
  * Fix non-removal of rem_str on 60_lp_instead_of_lpr (closes: #341445)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed, 30 Nov 2005 15:04:33 -0200

hplip (0.9.7-2) unstable; urgency=low

  * Brown paperbag release
  * Actually add 60_lp_instead_of_lpr to list of active dpatches.
    This closes: #336407 for real

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Fri, 25 Nov 2005 00:24:58 -0200

hplip (0.9.7-1) unstable; urgency=low

  * New upstream version
    * HPIJS 2.1.7:
      + Fixed OJ K550 typo in HPIJS
      + Added photo tray support to DJGenericVIP device class. This effects
        all DJGenericVIP PPD files
      + Added support for the following new printers:
        + HP Color LaserJet 3000 (LJColor/PS)
        + HP Color LaserJet 3600 (LJJetReady)
        + HP Color LaserJet 3800 (LJColor/PS)
    * HPLIP 0.9.7:
      + Added 1284.4 support to hpiod. Previous support was MLC only
      + Changed hp-toolbox startup behavior to increase performance
      + Added checks in messaging code to prevent invalid messages from
        crashing hpssd
      + Added hp-toolbox PML cleanup code to LJ status code
      + Fixed clj28xx scanning issue. Mfpdtf buffer was too small
        libsane-hpaio. This fixes a problem introduced in 0.9.5
      + Modified hp-makeuri to allow hostnames for network addresses
      + Added support for "alternate n-up" for PS documents to hp-print
      + Fixed an issue where the website link for support information is
        wrong in "HP" tab of "Support Information" dialog
      + Fixed an issue setting the scan token in libsane-hpaio
      + Fixed an issue where an error occurs while executing the command
        "hp-check -lnone" in terminal
      + Fixed an issue where an exception is caught but the program does not
        show a correct prompt when running the command "hp-align" with parameter
        -p
      + Fixed System::GetSnmp sigfault in hpiod. This will fix network
        scanning/hp-toolbox issues in previous HPLIP releases
      + Fixed an issue where an error occurs while executing hp-photo after
        the usb cable was disconnected
  * Use far less tight versioning that works with the new rules for binNMUs,
    and break a dependency loop while at it (closes: #339909)
  * Add versioned dependency on coreutils 5.1+ (closes: #337375)
  * New dpatch 60_lp_instead_of_lpr:
    Use "lp" instead of "lpr" to submit jobs (closes: #336407)
  * Ship copyright and changelogs along with hplip-data too, as it is not
    depending on hplip anymore and the /usr/share/doc/hplip-data symlink has
    to go away

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Thu, 24 Nov 2005 16:20:29 -0200

hplip (0.9.6-1) unstable; urgency=low

  * New upstream version
    * HPIJS 2.1.6:
      + Moved DJ450 from DJGenericVIP class to DJ9xxVIP class, because
        mandatory margins are 0.25 inch on left and right sides and it does
        not support fullbleed on any papersize
      + Added a new printer family, DJ55xx to take care of margin issues for
        DJ55xx printers
      + Fixed a bug in sending custom paper size to JetReady and FastRaster
        printers
      + Fixed a bug in LJFastRaster when last band was less than 128 height,
        it was incorrectly positioned.
      + Fixed margin adjustment code to allow fullbleed or .125 inch margins
        for those printers that support it in autoduplex mode
      + Added support for the following new printers:
        + HP Color LaserJet 4730 MFP (LJColor/PS)
        + HP Deskjet 460 (DJGenericVIP)
        + HP Officejet Pro K550, K850 (DJGenericVIP)
    * HPLIP 0.9.6:
      + In hp-toolbox (Device Manager) made a small LaserJet status change
        that makes the CLJ 2550 work correctly
      + Fixed a bug with the PSC3310 with low photo supplies (caused a
        toolbox exception)
      + Fixed a problem that made an offline CLJ2500 crash hpssd
      + The hp-toolbox no longer uses a "listen" server socket.  All
        communication is done over the same client socket to hpssd
      + Added new hp-toolbox UI for supplies and maintenance tools
      + Made numerous changes to hp-toolbox
      + Set CLJ 25xx devices to uni-di mode in models.xml
  * Henrique de Moraes Holschuh:
    * Remove patches already applied upstream:
      00_upstream-0.9.5-3, 11_fix-misc-gcc-warnings, 13_intsign-fixes,
      15_64bit_fixes, 20_fix_unitialized_var_bugs, 50_hp-clean_fix,
      99_ubuntu_hplip-deroot
    * Remove some hunks already applied upstream:
      14_charsign_fixes
    * Add a NEWS file for hpijs, warning users of PPDs that are documented
      by upstream to have been changed significantly
    * Fix hpijs autobuild system to actually work re. libhpip, by adding
      some automake magic and libtool support
    * Merge hplip-base and hplip packages.  Current upstream code makes it
      a losing battle to try to keep the two separate
    * Don't bother explaining about alternate PPD sources in basic docs like
      README.Debian.  Don't suggest them in control file, either.  This is
      needed because HPLIP PPDs often change in non-forward or non-backwards
      compatible ways
    * Remove stray scan/__init__.py file
    * New patch 30_noping: Do not attempt to send icmp packets in hpssd, as
      it will not work since it doesn't run as root anymore.  Thanks to
      tatu.mannisto@iki.fi for the report (closes: #333850)
    * New patch 40_quiet-hpiod: Shut hpiod up while trying to autodetect
      parallel port printers, it was being waay too annoying in syslog
    * New patch 50_doc-location: Add final / to URIs and point the readme
      to the /usr/share/doc location inside hp-toolbox.  If the local admin
      doesn't like documentation and removes /usr/share/doc/hplip, this
      doesn't break anything... you just get no documentation, which was
      kind the point the admin was trying to make, I suppose ;-)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon, 24 Oct 2005 13:08:43 -0200

hplip (0.9.5-4) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * Add more hunks to 14_charsign_fixes, probably non-critical fixes
    * Clean up and revamp configure.in/Makefile.am so that it is less buggy
      re. some 'assumptions' made upstream (closes: #329782)
    * Version pyqt build-dependendices to make sure no autobuilder will
      screw us over the C++/gcc transition, these can be removed in the
      not-so-distant future
    * Fix minor typo in a package description
    * Move hp-print from hplip-base to hplip, as it has a GUI now, thanks
      to HPLIP upstream for the bug report
    * Move /usr/lib/hplip/plugins from hplip-base to hplip package, as it
      is an ui/ component

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed,  5 Oct 2005 00:14:33 -0300

hplip (0.9.5-3) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * Added upstream patch 0.9.5-3
      + Fix scanning on little-endian hosts
    * Dropped 40_testmail_fix, not only it was already present upstream,
      but I failed to notice patch screwing up royally when I rediffed it
      for 0.9.5-1.  Thanks to HPLIP upstream for the heads'up(!)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed, 21 Sep 2005 00:06:21 -0300

hplip (0.9.5-2) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * Added upstream patch 0.9.5-2
      + Fix scanning on Laserjets
      + Fix scanning on parallel-port only Inkjets

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue, 20 Sep 2005 01:01:05 -0300

hplip (0.9.5-1) unstable; urgency=low

  * New upstream version
    * HPIJS 2.1.5:
      + Fixed a 4-sided full bleed printing issue in HPIJS
      + Added support for the following new printers:
        HP Photosmart 420 (PSP100)
        HP Photosmart 470 (PSP100)
        HP Photosmart 2570 (DJGenericVIP)
        HP PSC 1400 (DJ3600)
        HP Officejet 5600 (DJ3600)
        HP Photosmart 3100 (DJGenericVIP)
        HP Photosmart 3200 (DJGenericVIP)
        HP Photosmart 3300 (DJGenericVIP)
        HP Photosmart 8000 (DJGenericVIP)
        HP Photosmart 7800 (DJGenericVIP)
        HP Deskjet 5940 (DJGenericVIP)
        HP Deskjet 5440 (DJGenericVIP)
        HP Color laserJet 4700 (LJColor/PS)
    * HPLIP 0.9.5:
      + Added parallel port support for printing and scanning. See
        Product Support table for supported devices and features
      + Changed the PS8700 PPD inputslot from "default" to "upper"
      + Fixed miser mode MLC credit problem in hpiod
      + Fixed MLC credit problem with short timeouts
      + Fixed many known hp-toolbox issues
      + Fixed case where hp-toolbox crashed if models.xml entry was missing
      + Fixed hp-colorcal incorrect parameter passing to maint routines
      + Fixed a bug in hpssd.py that caused hal:\\ devices to crash hpssd
      + Fixed supplies status for CLJ28xx
      + Fixed powersettings for DJ4x0
      + Fixed LJ1022 status problem
  * Henrique de Moraes Holschuh:
    * Dpatch maintenance:
      + Remove 20_useless_assignment_fix: fixed properly upstream
      + Update 11_fix-misc-gcc-warnings, 14_charsign_fixes,
        50_hp-clean_fix: some hunks fixed upstream, some new hunks added
      + Rediff 13_intsign-fixes, 40_testmail_fix
      + New 20_fix_unitialized_var_bugs: fix some real bugs caused by
        broken code with unitialized variables
      + Switch all dpatches to /usr/share/dpatch/dpatch-run
    * Add hp-levels symlink for new utility, that shows agent levels
      using ASCII-art bar graphs

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon, 19 Sep 2005 11:44:52 -0300

hplip (0.9.4-4) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * Rebuild for C++ transition
    * Mention usblp on README.Debian (closes: #326684)
    * Fix invocation of dh_python for all binary packages other than hplip
    * Do not remove pyc/pyo python compiled files from package hplip-base
      when package hplip is removed
    * Switch initscript to LSB-like reporting, and remove old HPGUId cruft
      while at it
    * hplip-base: add dependency on lsb-base due to initscript changes

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Thu,  8 Sep 2005 12:47:58 -0300

hplip (0.9.4-3) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * New cleanup patches: 14_charsign_fixes, 20_useless_assignment_fix
    * New dpatch: 15_64bit_fixes
    * New hunks to dpatch: 11_fix-misc-gcc-warnings.dpatch

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sat,  6 Aug 2005 02:10:24 -0300

hplip (0.9.4-2) unstable; urgency=low

  * Matthias Klose <doko@ubuntu.com>:
    * hplip-base should also replace files in hplip-data (<< 0.9.3)
    * Run HPLIP daemons as non-root user (optional, default as run as root)
      (closes: #320936)
  * Henrique de Moraes Holschuh:
    * Modify Matthias' postinst to create the hplip user in a safer way
    * Depend on the correct adduser version for the above (just in case some
      dweeb tries to backport this to ancient Debian)
    * Add hplip-base.post{inst,rm} and initscript machinery for the hplip
      user, supporting ephemeral /var/run and dpkg-statoverride the way I
      like it
    * Make run-hplip-as-non-root *non*-optional, it is safer and there is
      nothing in hpiod or hpssd that requires root priviledges to work in a
      Debian system
    * Add NEWS.Debian item about running as non-root

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue,  2 Aug 2005 23:36:19 -0300

hplip (0.9.4-1) unstable; urgency=low

  * New upstream version
    * HPIJS 2.1.4:
      + In order to accommodate 4-sided full bleed, PS320/330/370/380 were
        moved to the DJGenericVIP device class
      + Added hplip_api convenience library
      + Fixed a problem where bi-di was not turned off correctly in hpijs.
        This caused extra deviceid queries
      + Fixed postscript PPD file case sensitivity issue. This issue caused
        a problem with kprinter
      + Added PPD files for the following new printers: HP Color LaserJet
        2800, HP Photosmart 8200, HP Photosmart 330, HP Photosmart 380,
        Deskjet 1280, Deskjet 3040, Deskjet 3920
    * HPLIP 0.9.4:
      + Added uni-di device support to "hp" backend
      + Added hplip_api convenience library.  Converted HPLIP clients (hp,
        libsane-hpaio, hpijs, ptest) to hplip_api
      + Added device ID mode to hp-info utility (Tim Waugh of Red Hat
        request)
      + Added new DeviceOpen() parameters to accommodate different backend
        types
      + Changed and added new "io" support tags to models.xml
      + Added LJ1022 to models.xml file
      + Desensitized model names generated by hpiod. This will eliminate
        leading, trailing and double spaces in the model name
      + Made change to the models.xml file for Photosmart 120 and 240 series
        which had pen 57 mislabeled as black
      + Added LJ 8000, LJ 1160 series entries to models.xml
      + Removed LJ 3100 from models.xml. There are no plans to support this
        printer
      + Fixed a scanimage problem with OJ D135 and OJ 7110
      + Fixed "Invalid color calibration type" error in hp-colorcal
      + Fixed "Unknown internal error" when executing command "hp-probe
        -bnet"
      + Fixed a intermittent SNMP problem reading signed integers in hpiod.
        This will fix some network scanning issues.
      + Enhanced hp-info and hp-makeuri as per Red Hat and Suse request
      + Changed SLP detection to detect more devices based on forum
        feedback
      + Added limited support for HP Color LaserJet 2800, is limited to:
        only postscript printing is supported; Photo Card access is not
        available via hp-photo, but it is available via USB mass storage;
        Network scanning is supported, but USB scanning is not;
        Hp-toolbox status is not complete
  * Henrique de Moraes Holschuh:
    * Removed patches already upstream: 00_upstream_0.9.3-1,
      10_missing-prototypes
    * Merged LTLIBRARY instances in top Makefile.am
    * Fixed some minor typos in README.Debian, thanks to Santiago Vila
    * Bump standards version to 3.6.2, no changes
    * Makefile.am: declare colorcal4form_base.ui, printerform_base.ui as
      noinst_DATA

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sun, 24 Jul 2005 09:37:29 -0300

hplip (0.9.3-3) unstable; urgency=high

  * New upstream patch 0.9.3-1 to hpijs:
    + Fixed a bi-di problem with all LIDIL printers (DJ3320, DJ3600)
    + Fixed a 64-bit problem with LJJetReady printers
    + Fixed a KRGB issue in the VIP path in HPIJS. This fixes a problem
      where black text would drop some pixels with VIP printers (DJ9xxVIP,
      DJGenericVIP) (closes: #314442)
  * Henrique de Moraes Holschuh:
    * Minor updates to README.Debian on the various packages
    * Rework package descriptions a bit in control file
    * Stop confliting with HPOJ.  We are fine with it as long as the same
      device is NOT being used by HPOJ and HPIJS
    * Remove hplip-base dependency from hplip-ppds. Instead, suggest
      hpijs and hplip-base in hplip-ppds, and ship changelog instead of symlink
    * Remove some stray -Nhplip crap from arch-dep section of rules files
    * Remove 12_fix-gcc4-errors.dpatch, accepted upstream (patch 0.9.3-1)
    * debian/rules: avoid useless /usr/bin/find warnings about 
      maxdepth/mindepth

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed, 29 Jun 2005 00:48:18 -0300

hplip (0.9.3-2) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * New binary-all package: hplip-ppds, with the PPDs shipped by HPLIP
      upstream.  Other than due to bug-fixes, these are usually a better
      match for the current hpijs/hplip capabilities than those from
      foomatic-filters-ppds or foomatic-db-hpijs
    * Change the Manufacturer string on all PPDs to "HP (HPLIP)", to set
      them apart from PPDs of other sources
    * Update README.Debian with information about the HPLIP PPDs
    * Recommend hplip-ppds (closes: #311470, #311474)
    * New patch: 12_fix-gcc4-errors (closes: #310435)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sat,  4 Jun 2005 09:28:18 -0300

hplip (0.9.3-1) unstable; urgency=low

  * New upstream version
    * HPIJS 2.1.3:
      + Increased the printable region for DJGenericVIP. This resolves a
        left margin issue
      + Fixed a problem printing more than one page with LJ 1010/1012
      + Modified hpijs to ignore bi-di errors so the "hp" backend can
        handle them.  This fixed a problem where hpijs would hang
        forever
    * HPLIP 0.9.3:
      + Modified models.xml Deskjet_1220C panel_check_type to be 0
      + Fix the Test Email Alert
      + Added MlcInit retry to hpiod
      + Changed hplip_readme.html "Photo" support to yes for
        OJ7200/7300/7400
      + Fixed intermittent device hang problem with LJ 1010/1012/1015
        in hp.c
      + Added OfficeJet V40 to models.xml
      + Fixed models.xml so that LJ 1010, 1012, 1015, and 1022 all print
        using "raw" io
      + Fixed "hp-probe -s*" error
      + Fixed error while clicking the"Access Photo Cards" without any
        photo card
      + Fixed error while running hp-testpage command to print
        after disconnecting the USB cable
      + Added LJ 1010 and 1012 to models.xml, and made sure the OJ K80xi
        has both a single spaces and a double spaced entry
      + Fixed error which occurs after launching the toolbox in the terminal
      + In models.xml cloned HP LaserJet 4050 Series to the same thing with a
        trailing underscore
  * Henrique de Moraes Holschuh:
    * Swap maintainer and uploader fields for now, since I am spending
      far more time in HPLIP than Torsten.  Should that change, he will
      switch the fields back as they were
    * Tell libtool that the sane plugin is a plugin with -module
    * Split hplip into GUI and non-GUI packages, as suggested by
      Matthias Klose <doko@ubuntu.com> (closes: #307790)
      + Change /usr/share/doc/hplip to a symlink (requires hplip.preinst
        and hplip.postinst glue to support error unwind and downgrades)
      + Change hplip package to arch all, as all C source and binary
        modules belong in hplip-base
      + hplip-base.preinst (new), hplip-base.postrm (new), hplip.postrm:
        Remove any .pyc and .pyo files scattered around /usr/lib/hplip
    * Fix configure.in, Makefile.am to accept and use a PYTHON variable
      to select the python version to run properly, and really use whatever
      python that variable points to, and no other (closes: #307788)
    * Rework configure.in and Makefile.am a bit, in a moment of utter
      boredom
    * Change autogen.sh and debian/rules to get the hpijs versioning
      through autoconf --trace at autotools-run time, and document the
      debian/hpijs.version file in debian/README.Source
    * Remove unneeded #! lines from python modules before packaging the
      debs, to make lintian happier
    * Control new files showing up upstream, by using a static list of
      non-shipped files and passing --fail-missing to dh_install
    * Remove debian/executable.files and debian/deletable.files support,
      as this package does not require it
    * hplip-base: recommend cupsys-client, as some of the utilities
      run "lp -d..." and friends (closes: #308960)
    * Rediff 01_rss.dpatch, 10_missing-prototypes.dpatch,
      11_fix-misc-gcc-warnings.dpatch, 13_intsign-fixes.dpatch,
      40_testmail_fix.dpatch, 50_hp-clean_fix.dpatch to remove some hunks
      accepted upstream and remove any fuzziness and line numbering skews
    * Remove patch 30_bind_to_INADDR_LOOPBACK, completely accepted
      upstream

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed, 25 May 2005 00:31:22 -0300

hplip (0.9.2-2) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * Added new patch: 50_hp-clean_fix, fix hp-clean bad wipeAndSpitType1()
      invocation

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue, 26 Apr 2005 02:04:27 -0300

hplip (0.9.2-1) unstable; urgency=medium

  * New upstream version
    * HPIJS 2.1.2:
      + Added new print mode "FastDraft Grayscale" to DJGenericVIP
      + Put limit (max=5) on syslog messages when output device write()
        fails (closes: #210449)
      + Removed specified gcc options in hpijs configure.in
      + Fixed a 64-bit compile issue in ljjetready.cpp (closes: #302828)
    * HPLIP 0.9.2:
      + Fixed "Invalid color calibration type" error occurs when executing
        command "colorcal" in terminal
      + Fixed number of arguments error in hp-align
      + Made UI architectural change (removed hpguid.py, removed popup feature,
        etc)
      + Fixed a scanning issue with Laserjet flatbed scanners (PML scanners).
        Scan would fail at end of scan
      + Removed images.tgz after install
      + Fixed a problem when all function buttons are grayed out when toolbox is
        launched at the first time.
      + Fixed DJ450 battery check issue
    * Henrique de Moraes Holschuh:
      * Updated dpatch 11_fix-misc-gcc-warnings with many new hunks
      * Added 40_testmail_fix, to get hpssd and Test Email functionality to
        actually work (it was completely useless and hopelessly broken)
        (closes: #291346)
      * Updated README.Debian files for HPIJS and HPLIP

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed, 20 Apr 2005 10:05:59 -0300

hplip (0.9.1-2) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * New dpatch (30_bind_to_INADDR_LOOPBACK):
      Bind to INADDR_LOOPBACK instead of to INADDR_ANY for now, as
      HPLIP is constrained to working bound to localhost currently
      (closes: #304068)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Wed, 13 Apr 2005 08:14:25 -0300

hplip (0.9.1-1) unstable; urgency=low

  * New upstream version:
    * HPIJS 2.1.1:
      + Fixed hpijs bi-di assert issue with business inkjet 1100
      + Added PPD files for the following printers: HP LaserJet 4240,
        HP LaserJet 9040, HP color LaserJet 4610, HP LaserJet 1022,
        HP Business Inkjet 1000
    * HPLIP 0.9.1:
      + Added a "front panel" enable/disable flag to models.xml. Some printers
        were disabled (ie: deskjets)
      + Ink level and status displays have been fixed for CP1160/1700, OJ7100
         series and OJ D series
      + Added battery level check for mobile deskjets (DJ 450, etc)
      + Fixed issue that could cause DJ 450 to lock-up during panel check
        (miser mode)
      + Fixed extraneous hpiod error. Corrected pml iod in scl path that was
         in libsane-hpaio
      + Added PSC 750xi, OJ 5110 to models.xml file
      + Added device manager *.ui files to package
  * Henrique de Moraes Holschuh:
    * Rebuild 11_fix-misc-gcc-warnings, most of it accepted upstream,
      but we have also new hunks as well
    * Remove 12_portability-fixes, accepted upstream
    * Remove 14_fix-fat-prototypes, accepted upstream
    * Remove 20_jddirect-bug-from-hell, fixed upstream
    * Remove 30_fix-missing-retcode, accepted upstream
    * Avoid shipping check.py, since it is useless for Debian systems
    * Change both upstream and Debian build system to take advantage
      of the .ui files and rebuild the .py files that are generated
      from them using pyuic
    * Build-depend on pyqt-tools for pyuic

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sat,  2 Apr 2005 10:58:28 -0300

hplip (0.9-1) unstable; urgency=low

  * New upstream version (closes: #302230):
    * HPIJS 2.1:
      + Added two new device classes - LJFastRaster and LJJetReady
      + Fixed input tray issue with Business Inkjet 1100/1200
      + Changed default quality setting from 300 to 600 dpi for DJ9xxVIP
      + Replaced gdevijs-krgb-1.0.patch with gdevijs-krgb-1.1.patch
        This patch fixes as segfault issue with 1-bit color space IJS drivers
        (ie: epsonepl)
      + Fixed a issue with DJ3600 photo pen printing
      + Support additional printers: LaserJet 1010/1012/1015, Color LaserJet
        3500/3550, HP Photosmart 8750, HP Deskjet 6600, HP Deskjet 9800 Series
    * HPLIP 0.9:
      + Added network scanning support
      + Added full status and supply information for most LaserJets
      + Added hp-makeuri command for generating "hp" URIs from an IP address
         or device node
      + Fixed some network issues with hp-probe
      + Fixed a problem with multiple files using the same name in photo card
      + Fixed a bug in the cancel job code in hp-toolbox
      + Fixed some dialog cancel defects in clean and align
      + Reversed order of status history in hp-toolbox
      + Added photo card access status
      + Added hp-toolbox right click menu
      + Hpssd no longer scans devices at startup, devices are scanned when
        hp-toolbox is first started
      + Removed power-up from the probe command in hpiod.  This means that
        when CUPS queries the "hp" backend for devices, the printer will not
        power-up (closes: #291321)
      + Added non-zero exit codes to hp-toolbox
      + Added changes to display EXIF data in photo card
      + Added channel cleanup code to hpiod.  This will fix some issues when
        canceling print jobs from the host
      + Added a non-scrolling "front panel display" feature to hp-toolbox
      + Added Color Calibration for various printer platforms
      + Do not keep restarting/reopening hp-toolbox at every status change
        (closes: #292672)
  * Henrique de Moraes Holschuh:
    * Build-depend on libjpeg62-dev for hpijs 2.1
    * Version build-dependency on libsnmp5-dev (>> 5.1.2-6), to avoid
      #302195 which completely hoses the hplip build
    * Remove 30_xpp_support.dpatch, applied upstream
    * New patches:
      + 10_missing-prototypes: Add missing prototypes
      + 11_fix-misc-gcc-warnings: Fix bad C code that causes
        warnings and strict aliasing rules problems (closes: #297587)
      + 12_portability-fixes: Remove braindamage that causes
        portability problems and warnings
      + 13_intsign-fixes.dpatch: Fix signed/unsigned comparison issues
      + 14_fix-fat-prototypes: Fix prototypes missing a (void) so that gcc
        shuts up
      + 20_jddirect-bug-from-hell: Fix complete breakage in
        JetDirectDevice::NewChannel (undefined value assigned to channel
        mode)
      + 30_fix-missing-retcode: Add missing assignment of retcode
    * Add hplip.desktop freedesktop.org file, thanks to Christopher Martin
      (closes: #302248)
    * Rename all hplip_* links in /usr/bin to hp-* to follow upstream
    * Ship new SANE backend dll.d configuration, and conflict with libsane
      (<< 1.0.15-7) (closes: #296317)
  * Torsten Landschoff:
    + debian/control: Fix typos in description
      - of hpijs: a IJS driver -> an IJS driver (closes: #299987)
      - of hplip: a X11 session -> an X11 session (closes: #299991)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Fri,  1 Apr 2005 09:38:12 -0300

hplip (0.8.8-1) unstable; urgency=low

  * UNRELEASED: This release was never uploaded to unstable due to serious
    issues with many devices

  * New upstream version:
    * Added low ink infrastructure to device manager
    * Made fixes to cleaning procedure
    * Offline devices will now show supplies list with "Unknown" levels (was
      blank before)
    * Fixed the display for black cartridge number 15 on the Supplies Tab
    * Added tech-type to models.xml
    * Fixed Laserjet 1220 model.xml entry
    * Fixed an issue with the Alert email service (does NOT fix #291346)
  * Henrique de Moraes Holschuh:
    * Removed patches accepted upstream:
      20_hpiod_pidfile.dpatch, 40_gcc4_buildfixes.dpatch,
      50_securityfix_umask.dpatch,
      51_securityfix_detect_unsafe_conf_file.dpatch
    * Remove patches that don't make sense anymore
      10_toplevel_makefile.dpatch
    * Rediff 30_xpp_support so that it applies cleanly

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sun, 13 Feb 2005 21:04:27 -0200

hplip (0.8.7-4) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * HPLIP:
      * Remove stray tab on 50_securityfix_umask.dpatch.  Reupload in
        case python decides to croak on us because of it
      * Remove unneeded (but harmless) patch 21_base_pidfile_support.dpatch

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue,  1 Feb 2005 12:46:56 -0200

hplip (0.8.7-3) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * HPLIP:
      * SECURITY FIX: create .hplip.conf on user directory mode 600 (was 666)
        The HPLIP suite was failing to set the process umask to sane values,
        hpssd.py and hpguid.py were affected.  Also, modify HPLIP so that it
        warns the user of the broken permissions, ignores such a file, and 
        fixes the permissions on the next time the config file is written to.
        Thanks to Erwan David <erwan@rail.eu.org> for reporting this bug
        (closes: #293117)
    * Really fix debian/rules to unpatch only after cleaning the tree

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue,  1 Feb 2005 11:03:22 -0200

hplip (0.8.7-2) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * Updated copyright file with all the relevant information for HPLIP
    * Move dh_python calls to before dh_installdeb (closes: #291746)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sat, 22 Jan 2005 23:24:22 -0200

hplip (0.8.7-1) unstable; urgency=low

  * New upstream source
    + Fixed a issue with the max setting for input trays in APDK (HPIJS 2.0.1)
    + Added OfficeJet K series support
    + Changed scanning default compression from none to jpeg. This speeds up
      device I/O significantly during scans
    + Cleaned up cancel button functionality in device manager.
    + Added r value caching to hpssd to increase responsiveness of some
      printers when doing dynamic counters
    + Fixed a defect in strings.py (wrong string for not installed cart)
    + Added DeviceIDs to the models.xml file
    + Added PPD files for the following new printers: LaserJet 4345 MFP,
      LaserJet 3015/3020/3030
    + Fixed some devices which were wrongly set to MLC mode instead of RAW
  * Henrique de Moraes Holschuh:
    * Better dpatch support on debian/rules: use clean-patched target
      instead of reinvoking make
    * Patches 22_hpssd_pidfile and 50_bigendian merged upstream
    * Rediff all dpatches and switch to -p1, so that using dpatch-edit-patch
      is much easier
    * HPLIP:
      * Try to stop all instances of hpguid.py on initscript stop.  We need
        to revisit this later when hpguid and hpssd get more intelligent
        hpguid pidfile/termination handling

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Fri, 21 Jan 2005 12:39:24 -0200

hplip (0.8.4-5) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * HPIJS:
      * s/cartridge/pen/ everywhere in the Debian stuff, since that's how HP
        calls the printing head + ink cartridge combo
    * HPLIP:
      * Add dependency on python-qt3 (closes: #291202)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Thu, 20 Jan 2005 04:54:42 -0200

hplip (0.8.4-4) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * HPLIP:
      * Fix FTBFS on big-endian archs: add 50_bigendian.dpatch, to fix typo
        in pcard/vfat.h
    * Add lintian overrides for "description-synopsis-starts-with-a-capital-
      letter", since HP *is* always written in uppercase

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue, 18 Jan 2005 23:50:03 -0200

hplip (0.8.4-3) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * HPLIP:
      * Add python to build-depends, fix FTBFS on all arches
      * Switch all python2.3-* build-depends to python-* build-depends

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue, 18 Jan 2005 12:38:40 -0200

hplip (0.8.4-2) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * HPIJS:
      * Apply patch by Andreas Jochens <aj@andaco.de> to fix FTBFS
        problems with gcc 4.0 on AMD64 (#286353)
      * Improve suggests: for foomatic and hplip integration
    * HPLIP:
      * Conflict with all non-bidir-enabled hpijs and foomatic versions
      * Add a quick-install guide to README.Debian
      * Be silent about CUPS reloads, to avoid startling users during
        system shutdown
  * Upload to Debian unstable.  Do note that 64-bit archs are still an
    unknown (feedback welcome)

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue, 18 Jan 2005 00:54:44 -0200

hplip (0.8.4-1) experimental; urgency=low

  * Initial packaging of HPLIP (closes: #285026)
  * Source for HPIJS is now provided by the HPLIP source package
  * Version of the hpijs package will now be:
    <hpijs upstream version>+<hplip package version>

  * Henrique de Moraes Holschuh:
    * HPIJS:
      * New upstream source, supports HPLIP bi-directional channels, and
        DJGenericVIP four-sided full bleed printing.  Now support printers
        that require bi-directional channels to work.
      * Update Depends: to versions of the gs packages with KRBG support
      * Ship KRGB patch in usr/share/doc
    * HPLIP:
      * Added pidfile locking to hpiod, hpssd [merged upstream in 0.8.4]
      * Fixed upstream autotools build system something fierce
      * Build libhpip as a convenience library (and don't package it)
      * Add hplip_* links to the user binaries on /usr/bin
      * Add a hpssd link on /usr/sbin and use that on initscript
      * Support xpp as a default "print" GUI interface

      * This is not complete yet.  This package has not been validated to
        work on 64-bit archs (help is welcome) upstream.  We have absolutely
        no idea if the MFP utilities (photo-card reading, SANE scanning) work
        at all (help is also welcome).
      * Do not install this if you are not ready to help track down the bugs

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sat, 18 Dec 2004 12:25:49 -0200

hpijs (1.7.1-1) unstable; urgency=high

  * Henrique de Moraes Holschuh:
    * New upstream source (1.7.1)
      + Support a few more printers (PPD changes only)
      + No upstream changes to any binary packages
    * Urgency high, since this is only an upstream-sync upload with
      no noteworthy changes
    * debian/watch: add primary watch line using prdownloads.sf.net,
      since the ftp servers for sf.net are not realiable at all

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon, 15 Nov 2004 11:47:48 -0200

hpijs (1.7-1) unstable; urgency=medium

  * Henrique de Moraes Holschuh:
    * New upstream source (1.7)
      + Support a few more printers (code changes, not only PPD changes)
    * Add watch file for uscan/DEHS
    * Remove patch 03_fixsegfaults, now applied upstream
    * Remove disabled patch 02_destdir, applied upstream a long time ago

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sun, 17 Oct 2004 12:41:21 -0300

hpijs (1.6.2-1) unstable; urgency=medium

  * Henrique de Moraes Holschuh:
    * New upstream version (no changes to binaries, since we do not ship the
      PPD files from this source package).
    * Update autogen.sh for automake 1.9, rerun autotools
    * Remove all autogenerated files from CVS tree (use debian/autogen.sh to
      recreate the files, debian/rules should do this automatically on
      cvs-buildpackage)
    * Suggests foomatic-db-hpijs (closes: #270566)
  * Urgency medium to get sooner into testing

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Sat, 18 Sep 2004 10:28:09 -0300

hpijs (1.6.1-1) unstable; urgency=low

  * Henrique de Moraes Holschuh:
    * New upstream version (no changes to binary packages,
      since we do not ship the PPD files from this source package).
    * Move autogen.sh to debian/ for tidyness
  * Not uploaded

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Fri,  9 Jul 2004 14:18:41 -0300

hpijs (1.6-3) unstable; urgency=low

  * Mention hpoj on README.Debian and package description.

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Fri,  9 Jul 2004 13:41:00 -0300

hpijs (1.6-2) unstable; urgency=low

  * Add comment about rss patch to package description (closes: #209127)
  * Fix hpijs segfaults (probably non-exploitable) when given bad parameters,
    or when something bad happens at startup time.  HPIJS really needs an
    audit, since the code is doing NULL pointer derreferences that easily
    (closes: #169587)
  * Minor manpage tweaks, mention option -h

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon, 14 Jun 2004 19:35:45 -0300

hpijs (1.6-1) unstable; urgency=low

  * Henrique de Moraes Holschuh <hmh@debian.org>:
    * New upstream source:
      + Added support for: HP business inkjet 2300, HP officejet 9100,
        HP officejet 4200, HP psc 1310
      + Added envelope support, needed for center-feed envelope
        trays (ie: laserjets): Envelopes #10, A2, C6, DL, Japanese #3,
        Japanese #4
      + Added KRGB colorspace support (patch to ghostscript required to
        enable)
    * Update dependencies to use gs-gpl, add gs-afpl as lowest priority
    * Update standards version to 3.6.1
    * Add copyright notice for the Debian packaging to debian/copyright
    * Use debhelper compatibility mode V4
    * Switch to packaged dpatch
    * Remove auto-generated files auto-include.h and platform.h in clean
      target
    * Autotools-dev support, using links
    * Enable AM_MAINTAINER_MODE
    * Set things up so that we regen the entire autotools toolchain (by
      calling autogen.sh) on cvs-checkout.  Add an autogen.sh, since
      upstream lacks one
    * Modify configure.in so that our CXXFLAGS and CFLAGS are respected
    * Add a simple manpage for the hpijs binary with pointers to the real
      docs, since hpijs is NEVER called directly

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Mon, 17 May 2004 21:35:32 -0300

hpijs (1.5-1) unstable; urgency=low

  * New upstream release (closes: #218074).

 -- Torsten Landschoff <torsten@debian.org>  Wed, 29 Oct 2003 08:53:05 +0100

hpijs (1.4.1-1) unstable; urgency=low

  * New upstream release (closes: #198606).
  * Apply new black-ink-only patch from 
    http://www.linuxprinting.org/download/printing/hpijs/
    using dpatch (closes: #198657).
  * debian/control: Add Henrique de Moraes Holschuh to the Uploaders field
    (thanks for your help, Henrique).
  * debian/rules: Disable foomatic and cups install for now. Not sure how
    to deal with that correctly.

 -- Torsten Landschoff <torsten@debian.org>  Sun, 17 Aug 2003 01:43:11 +0200

hpijs (1.3.1-1.1) unstable; urgency=low

  * NMU
  * Copy in config.guess and config.sub from autotools-dev (20020320.1).
    Closes: #190959

 -- LaMont Jones <lamont@debian.org>  Mon, 12 May 2003 11:00:13 -0600

hpijs (1.3.1-1) unstable; urgency=low

  * New upstream release (closes: #188858).

 -- Torsten Landschoff <torsten@debian.org>  Sun, 13 Apr 2003 19:26:32 +0200

hpijs (1.3-1) unstable; urgency=low

  * New upstream release.
  * Disable the -rss patch as it no longer applies to this version of 
    hpijs and some of the changes have been folded upstream.

 -- Torsten Landschoff <torsten@debian.org>  Sat,  2 Nov 2002 09:50:10 +0100

hpijs (1.2.2-1) unstable; urgency=low

  * Co-Maintainer upload
  * New upstream version (Closes: #163094)
  * Added -rss patch (via dpatch)
  * debian/control: fix dependancy line (Closes: #153514, #159716)
  * debian/control: Updated Standards-Version
  * debian/copyright: Added note about the -rss patch

 -- Martin Loschwitz <madkiss@madkiss.org>  Sun, 13 Oct 2002 22:36:00 +0200

hpijs (1.2-1) unstable; urgency=low

  * New upstream release (closes: #147065).

 -- Torsten Landschoff <torsten@debian.org>  Thu, 18 Jul 2002 11:49:36 +0200

hpijs (1.0.4-2) unstable; urgency=low

  * Ship the hpijs_readme.html with the package (closes: #143492).
    For some reason the upstream Makefile does not install it anymore, 
    it is now listed in debian/docs.

 -- Torsten Landschoff <torsten@debian.org>  Thu, 18 Apr 2002 21:25:06 +0200

hpijs (1.0.4-1) unstable; urgency=low

  * New upstream release (closes: #135271).
  * No longer puts documentation files in /usr/share/doc/hpijs-$ver
    (closes: #131588).

 -- Torsten Landschoff <torsten@debian.org>  Mon, 25 Mar 2002 23:18:32 +0100

hpijs (1.0.2-1) unstable; urgency=low

  * New upstream release.
  * debian/control: As HP has updated the license of this software 
    it can now go into main. Woohoo! :-) Changed the section accordingly.
  * debian/copyright: Update to the new license.

 -- Torsten Landschoff <torsten@debian.org>  Sat, 19 Jan 2002 02:08:24 +0100

hpijs (1.0-3) unstable; urgency=low

  * debian/copyright: Include the more restrictive license. Seems like 
    hpijs.cpp was already changed to be DFSG compatible. Kudos to 
    James Troup for pointing this out.

 -- Torsten Landschoff <torsten@debian.org>  Tue, 15 Jan 2002 21:40:00 +0100

hpijs (1.0-2) unstable; urgency=low

  * ijs_server.c (ijs_server_init): Fix off by one bug which clobbered the
    stack making the binary unusable when compiled with optimization.
  * debian/rules.c (configure): Add support for --enable-debug using the
    DEB_BUILD_OPTIONS interface as suggested in debian-policy.

 -- Torsten Landschoff <torsten@debian.org>  Mon, 14 Jan 2002 03:09:00 +0100

hpijs (1.0-1) unstable; urgency=low

  * Initial release.

 -- Torsten Landschoff <torsten@debian.org>  Sat, 12 Jan 2002 03:40:10 +0100
