bluez-utils (3.7-1) unstable; urgency=low

  * New upstream release
  * removed some more patched included upstream
  * do not Suggest python anymore, bluez-pin is gone
  * remove hidd/hcid/pand/dund man pages, they are included upstream
  * remove sysvinit dep (closes: #386132)

 -- Filippo Giunchedi <filippo@debian.org>  Mon,  2 Oct 2006 00:20:01 +0200

bluez-utils (3.5-1) unstable; urgency=medium

  * New upstream release (closes: #384379)
  * urgency medium since we are closing RC bugs
  * removed bluez-bcm203x, obsoleted by upstream
  * fix MAKEDEV usage (Closes: #387182, #387193, #387197, #387410)
  * removed merged/obsolete patches:
    - debian/patches/000_rfcomm_conf_example.patch
    - debian/patches/006_xsims.patch
    - debian/patches/007_hcid_typo.patch
    - debian/patches/004_rfcomm_usage.patch
  * correctly set and restore IFS in /etc/init.d/bluetooth while parsing
    SDPTOOL_OPTIONS (Closes: #388514)

 -- Filippo Giunchedi <filippo@debian.org>  Sun, 17 Sep 2006 13:35:40 +0200

bluez-utils (3.1-4) unstable; urgency=medium

  * Acknowledge NMU by Marga, this closes: #379200
  * fixed udev rules accordingly with upstream
  * strip trailing \n if found in passkey (also closes: 383188)
  * fix /etc/default/bluetooth in README.Debian (closes: #383783)
  * add dbus to depends: for passkey management while discussing a better
    solution  (closes: #382791, #380283)
  * register_passkeys when doing an initscript restart (closes: 381582)
  * fix register-passkeys shell redirection (closes: #380452) 

 -- Filippo Giunchedi <filippo@debian.org>  Sun, 20 Aug 2006 14:18:19 +0200

bluez-utils (3.1-3.1) unstable; urgency=medium

  * Non-maintainer upload to fix Failure To Build From Source in builders
    that use sudo instead of fakeroot. (Closes: #379200)

 -- Margarita Manterola <marga@debian.org>  Wed,  2 Aug 2006 19:38:40 -0300

bluez-utils (3.1-3) unstable; urgency=low

  * s/PWD/CURDIR/ to avoid sudo FTBFSage, thanks Dato! (Closes: #379200)
  * new handling of outgoing PIN requests: there's a
    /usr/lib/bluetooth/register-passkey script that is invoked by the init
    script, it registers every passkey found in /etc/bluetooth/passkeys via
    the /usr/lib/bluetooth/add-passkey (a modified version of upstream's
    passkey-agent). /etc/bluetooth/pin is converted to
    /etc/bluetooth/passkeys/default if found.
    I hope this Closes: #378446 . README.Debian updated accordingly.
  * fix postinst for bluez-pcmcia-support as we don't ship
    /etc/pcmcia/bluetooth anymore (Closes: #378836) 

 -- Filippo Giunchedi <filippo@debian.org>  Tue, 25 Jul 2006 12:05:58 +0200

bluez-utils (3.1-2) unstable; urgency=low

  * more LSB info added to init script
  * default pin (or passkey) is 1234 (patch to hcid.conf)
  * drop bluez-pin dep (see #378427) as it is obsolete and install
    passkey-agent from upstream instead (Closes: #378446, #239820, #241120)
  * drop bluetooth-desktop as well
  * really install pcmcia-support udev rules (Closes: #377976)
  * do not install devfs rules as it is deprecated (Closes: #374307) 

 -- Filippo Giunchedi <filippo@debian.org>  Sun, 17 Jul 2006 09:21:50 +0200

bluez-utils (3.1-1) unstable; urgency=low

  * New upstream release
  * removed patches/003_hcid_conf_addition.patch: external PIN helper is no
    longer used, DBUS is used instead
  * removed patches/003_manpages.patch: applied upstream
  * removed patches/010_rfcomm_tty.patch: applied upstream

 -- Filippo Giunchedi <filippo@debian.org>  Mon,  3 Jul 2006 18:58:07 +0200

bluez-utils (2.25-2) unstable; urgency=low

  * added BLUETOOTH_ENABLE to /etc/default/bluetooth (Closes: #360915)
  * document /etc/bluetooth/pan/dev-up in pand.1 (Closes: #237825)
  * added info about discovering devices to README.Debian (Closes: #304222)
  * improved /etc/init.d/bluetooth, now featuring SDPTOOL_OPTIONS and using
    bash instead of sh (because of $IFS usage, improvements are welcome)
    (Closes: #185082) 3+ years old!
  * Depend: makedev | udev
  * fix the rfcomm 'anycommand' bug, upstream CVS patch (Closes: #229167)
  * fix the obscure error message from rfcomm when tty support is not
    available (Closes: #322732) 

 -- Filippo Giunchedi <filippo@debian.org>  Fri,  2 Jun 2006 14:10:35 +0200

bluez-utils (2.25-1) unstable; urgency=low

  * new upstream version
  * install anything from /etc/dbus*/, thanks to Hendrik Sattler
    (Closes: #284745)
  * first remove dangling init.d links, then move /etc/init.d/bluez-utils to
    bluetooth (Closes: #351330) 

 -- Filippo Giunchedi <filippo@debian.org>  Mon, 13 Feb 2006 22:31:26 +0100

bluez-utils (2.24-2) unstable; urgency=high

  * tight the dependency on lsb-base (>= 3.0-3) since we are using
    log_daemon_msg (Closes: #350876)
  * change dependency on makedev as suggested by Steve Langasek
    (Closes: #350591)
  * expand on hcid.conf(5) about pin helper parameters (Closes: #297566) 

 -- Filippo Giunchedi <filippo@debian.org>  Sun,  5 Feb 2006 21:52:39 +0100

bluez-utils (2.24-1) unstable; urgency=low

  * upload to unstable, rebuilding against dbus 0.60
    (Closes: #337988, #338794) 
  * make use of makedev in bluez-utils.postinst and conflict with
    experimental's makedev (Closes: #338743)

 -- Filippo Giunchedi <filippo@debian.org>  Mon,  9 Jan 2006 14:04:55 +0100

bluez-utils (2.24-0exp1) experimental; urgency=low

  * New upstream christmas release, really bugfix only
  * rebuild against dbus (closes: #338794)
  * fix hcid/security.c typo (closes: #339413)
  * reworked bluetooth init script
 
 -- Filippo Giunchedi <filippo@debian.org>  Mon, 26 Dec 2005 11:51:03 +0100

bluez-utils (2.23-0exp1) experimental; urgency=low

  * New upstream release, Closes: #338260
  * suggest: python (>=1.5) this closes: #328410
  * dbus_pin_helper is now documented in hcid.conf manpage (Closes: #295742)
  * added bluetooth and bluetooth-desktop metapackages for LSB 3.0 compilance
  * updated 003_manpages.patch 

 -- Filippo Giunchedi <filippo@debian.org>  Tue, 20 Dec 2005 14:15:37 +0100

bluez-utils (2.19-1) unstable; urgency=high

  * New upstream release.
  * Urgency high as fixes hcid pin helper vulnerability (CAN-2005-2547)
    (Closes: #323365)
  * Bump libbluetooth1-dev build dependency to 2.19
  * Add note about new features in debian/NEWS

 -- Edd Dumbill <ejad@debian.org>  Fri, 19 Aug 2005 01:12:02 +0100

bluez-utils (2.18-1) unstable; urgency=low

  * New upstream version (Closes: #311743)
  * Add amd64 to archs for bluez-pcmcia-support (Closes: #294489)
  * bluez-utils.init: use -q option to hid2hci, remove /dev/null
    redirection.

 -- Edd Dumbill <ejad@debian.org>  Sat, 16 Jul 2005 14:15:37 +0100

bluez-utils (2.15-2) unstable; urgency=low

  * Don't make device nodes if using udev (Closes: #283866) 

 -- Edd Dumbill <ejad@debian.org>  Sun,  6 Feb 2005 15:55:45 +0000

bluez-utils (2.15-1) unstable; urgency=low

  * New upstream release.
  * debian/control: require libbluetooth1-dev 2.15 or better to build.
  * Update 003_manpages.patch.
  * Retire 007_hidd_role_switch.patch as now in upstream.

 -- Edd Dumbill <ejad@debian.org>  Sat,  5 Feb 2005 18:09:24 +0000

bluez-utils (2.10-6) unstable; urgency=low

  * Move the bluez-bcm203x package to contrib and make it depend on the
    non-free firmware.

 -- Edd Dumbill <ejad@debian.org>  Wed,  1 Dec 2004 14:53:30 +0000

bluez-utils (2.10-5) unstable; urgency=high

  * Build depend on libbluetooth1 >= 2.10-2, to get HID fix in for
    big endian PowerPC machines and fix possible buffer overflow
    vulnerability.  See bug 281090 for more information.

 -- Edd Dumbill <ejad@debian.org>  Mon, 29 Nov 2004 16:48:39 +0000

bluez-utils (2.10-4) unstable; urgency=low

  * Reflect rename of bluez-bcm203x-firmware to bluez-firmware.
  * Update README.Debian to reference use of firmware packages.

 -- Edd Dumbill <ejad@debian.org>  Fri, 12 Nov 2004 14:13:30 +0000

bluez-utils (2.10-3) unstable; urgency=low

  * New package: bluez-bcm203x for Broadcom firmware loading on 2.4 series
    kernels.
  * bluez-utils now suggests the firmware package; many dongles require
    it to work.

 -- Edd Dumbill <ejad@debian.org>  Fri, 12 Nov 2004 14:00:59 +0000

bluez-utils (2.10-2) unstable; urgency=high

  * rules, bluez-pcmcia-support.postinst: ensure /etc/pcmcia/bluetooth is
    executable.

 -- Edd Dumbill <ejad@debian.org>  Fri, 12 Nov 2004 10:55:41 +0000

bluez-utils (2.10-1) unstable; urgency=medium

  * New upstream release.  Contains bugfixes useful for sarge.
  * Retire 007_pcmcia_conf.patch.
  * Add 007_hidd_role_switch.patch, which stops hidd forcing role switch.
    Added --master to HIDD_OPTIONS to ensure that Apple Bluetooth Keyboards
    reconnect automatically.  (Closes: #274495)

 -- Edd Dumbill <ejad@debian.org>  Thu, 14 Oct 2004 15:03:06 +0100

bluez-utils (2.9-4) unstable; urgency=high

  * Added patch 007_pcmcia_conf.patch, to fix breakage with PCMCIA startup.
    Thanks Zoltan Ivanfi. (Closes: #271622)

 -- Edd Dumbill <ejad@debian.org>  Wed, 15 Sep 2004 12:26:47 +0100

bluez-utils (2.9-3) unstable; urgency=high

  * debian/bluez-utils.init: Kill HCI connection on stop/start. Avoids need
    for taking batteries out of Microsoft Bluetooth mouse on restart.
  * debian/bluez-utils.init: Silence hid2hci output, it's noisy and shouldn't
    complain if no hid dongles found.
  * Fix a path in README.Debian (Closes: #266041)

 -- Edd Dumbill <ejad@debian.org>  Sun, 29 Aug 2004 18:21:22 +0100

bluez-utils (2.9-2) unstable; urgency=low

  * Add in libusb-dev dependency so hid2hci is built. 

 -- Edd Dumbill <ejad@debian.org>  Sun,  8 Aug 2004 16:58:39 +0100

bluez-utils (2.9-1) unstable; urgency=low

  * New upstream release.
  * Remove "XSI-isms" from init script, thanks David Weinehall
    (Closes: #259837)
  * Update configure flags.
  * Update Debian NEWS file.
  * Depend on libbluetooth1-dev >= 2.9-1.

 -- Edd Dumbill <ejad@debian.org>  Sun,  8 Aug 2004 15:44:08 +0100

bluez-utils (2.8-1) unstable; urgency=low

  * New upstream release.
    - Fixes initialisation of bnep interfaces (Closes: #256436)
  * Remove everything in the 2.6 modprobe conf that's in the default
  installation anyway.  This basically leaves hidp protocol.
  * Move dbus1-dev builddep to right place in control file (Closes: #257055)
  * Don't install unrequired printers.conf.
  * Amend README.Debian.bluez-cups to reflect no printers.conf.
  * Retire hidd patch.
  * Make hid startup happen before PAN startup (Closes: #258835)
  * Include hcid.conf man page (Closes: #257041)
  * Depend on libbluetooth1-dev >= 2.8-1 

 -- Edd Dumbill <ejad@debian.org>  Fri, 16 Jul 2004 21:08:55 +0100

bluez-utils (2.7-5) unstable; urgency=low

  * Add separate modprobe config for kernel 2.6 (Closes: #255188) 

 -- Edd Dumbill <ejad@debian.org>  Sat, 19 Jun 2004 20:37:40 +0100

bluez-utils (2.7-4) unstable; urgency=low

  * Add support for HID proxy dongles in the init script.  These
    will now be switched on after hidd starts.
  * Don't scribble permissions for /dev/rfcomm* on each install
    (Closes: #231510)

 -- Edd Dumbill <ejad@debian.org>  Mon, 14 Jun 2004 14:24:12 +0100

bluez-utils (2.7-3) unstable; urgency=low

  * Upload to unstable.

 -- Edd Dumbill <ejad@debian.org>  Wed,  9 Jun 2004 23:25:51 +0100

bluez-utils (2.7-2) experimental; urgency=low

  * Add fix from Marcel Holtmann for hidd killall command

 -- Edd Dumbill <ejad@debian.org>  Wed, 26 May 2004 19:43:04 +0100

bluez-utils (2.7-1) experimental; urgency=low

  * New upstream.
  * Further large changes: this package now incorporates dund and pand.
  * Updated man page patches.
  * Updated hcid.conf patch.
  * Enable building with D-BUS support.
  * Enable building of CUPS backend: goes in new package bluez-cups.
    Added printers.conf file and CUPS readme file.
  * Integrated pand and dund startup stuff into the init script.
  * Updated README.Debian.
  * Now Conflicts, Replaces bluez-pan.
  * Install module aliases in /etc/modprobe.d.

 -- Edd Dumbill <ejad@debian.org>  Wed, 26 May 2004 12:43:08 +0100

bluez-utils (2.6-1) experimental; urgency=low

  * New upstream.  In experimental as big changes.
  * Build for all except s390.
  * Conflicts with old bluez-sdp: this functionality is now in
    the bluez-utils package.
  * Merged startup from bluez-sdp into bluez-utils startup.
    postinst now removes rc.d links for bluez-sdp.

 -- Edd Dumbill <ejad@debian.org>  Thu,  6 May 2004 11:58:16 +0100

bluez-utils (2.4-6) unstable; urgency=high

  * Remove others-readable permissions from devfs configuration of
  rfcomm devices. Do the same for the non-devfs versions.
  (Closes: #229782)

 -- Edd Dumbill <ejad@debian.org>  Mon, 26 Jan 2004 15:55:52 +0000

bluez-utils (2.4-5) unstable; urgency=low

  * Use $(DEB_DESTDIR) in rules, don't assume debian/tmp. This should
  fix build failures on some of the buildds.

 -- Edd Dumbill <ejad@debian.org>  Thu, 15 Jan 2004 23:22:56 +0000

bluez-utils (2.4-4) unstable; urgency=low

  * Practically all of the work for this upload done by Philipp Matthias Hahn
    -- thanks Philipp!
  * bluez-pcmcia-support is Arch: alpha,arm,i386,ia64,powerpc only, because
    hppa,m68k,mips,mipsel,s390,sparc don't have pcmcia-cs. (Closes: #227925)
  * Improve all manual pages. (patch 003_manpages.patch)
  * Update rfcomm/main.h:usage() and rfcomm/rfcomm.1 (Closes: #227069)
    (patch 004_rfcomm_usage.patch)
  * Move bluepin and hcitool to /usr/bin (Closes: #226876)
  * Moved l2ping to /sbin.

 -- Edd Dumbill <ejad@debian.org>  Thu, 15 Jan 2004 18:22:20 +0000

bluez-utils (2.4-3) unstable; urgency=low

  * Don't install devfsd devices file, really (Closes: #220146)
  * Add corresponding note about older kernels and devfs.
  * Ensure NEWS.Debian is distributed (Closes: #227390)

 -- Edd Dumbill <ejad@debian.org>  Wed, 14 Jan 2004 11:47:19 +0000

bluez-utils (2.4-2) unstable; urgency=low

  * Depend on modutils or module-init-tools (Closes: #226366)
  * Maybe bluez-pcmcia-support be extra in priority, like pcmcia-cs

 -- Edd Dumbill <ejad@debian.org>  Tue,  6 Jan 2004 10:41:31 +0000

bluez-utils (2.4-1) unstable; urgency=low

  * New upstream.
  * Fix restart order (Closes: #224199)
  * Use mksymlink in devfsd conf file (Closes: #220146)
  * Add cmtp alias to the modutils file
  * Updated NEWS.Debian to note rfcomm config file change,
    update sample rfcomm config file

 -- Edd Dumbill <ejad@debian.org>  Thu,  1 Jan 2004 20:19:09 +0000

bluez-utils (2.3-4) unstable; urgency=low

  * Restart rfcomm in init script restart (Closes: #216907)

 -- Edd Dumbill <ejad@debian.org>  Sat, 25 Oct 2003 22:30:39 +0100

bluez-utils (2.3-3) unstable; urgency=low

  * Change python-gtk suggests to python-gtk-1.2 (Closes: #208119)

 -- Edd Dumbill <ejad@debian.org>  Wed, 24 Sep 2003 13:21:58 +0100

bluez-utils (2.3-2) unstable; urgency=low

  * Fix net-pf-31 alias to 'bluez' not 'hci_usb'
  * Move to cdbs
  * Change priority to 'optional'
  * Bump standards version to 3.5.9
  * Depend on the DBUS bluez-pin helper, and deprecate use of the
    buggy Python pin helper as a default. (Closes: #196092, #191444)
  * Move Python deps to Suggests.
  * Add explanation to README.Debian that headset utils are very
    experimental and not for installation (Closes: #196225)
  * Use start-stop-daemon in init file.
  * Change default PIN to '1234' as 'BlueZ' can't be used with most cellphone
    PIN requests.
  * Change default hcid.conf to include hostname in interface ID.

 -- Edd Dumbill <ejad@debian.org>  Thu, 28 Aug 2003 12:38:35 +0100

bluez-utils (2.3-1) unstable; urgency=low

  * New upstream release
    - hciconfig: CSR firmware revision support, voice commands now
      working on big endian machines
    - hciattach: support Texas Bluetooth modules, high UART rates on
      Ericsson modules, BCSP initialisation fixes
    - hcitool: support role switch command
    - removes glib dependency
  * Remove rfcomm lexing patch, now incorporated upstream

 -- Edd Dumbill <ejad@debian.org>  Sat, 22 Mar 2003 13:53:09 +0000

bluez-utils (2.2-4) unstable; urgency=low

  * Moved to Colin's Build System.

 -- Edd Dumbill <ejad@debian.org>  Sat, 22 Mar 2003 12:27:26 +0000

bluez-utils (2.2-3) unstable; urgency=low

  * Added versioned pcmcia-cs dependency for bluez-pcmcia-support,
    needs pcmcia-cs 3.2 or better. (Closes: #181685)
  * Amended bluepin to explictly require gtk 1.2 in anticipation
    of the change of python-gtk to default to gtk 2.0.
  * Fixed spelling mistake in bluepin.

 -- Edd Dumbill <ejad@debian.org>  Sat, 22 Feb 2003 11:54:32 +0000

bluez-utils (2.2-2) unstable; urgency=low

  * Fixed permissions of /dev/bluetooth and /dev/bluetooth/rfcomm.
    Thanks Gerd Flaig. (Closes: #181428)
  * Added rfcomm initialisation into init file, commented out example
    entry in rfcomm.conf so it doesn't get set up on init
  * Fixed a bug in rfcomm which meant an empty config file would
    generate a syntax error.

 -- Edd Dumbill <ejad@debian.org>  Tue, 18 Feb 2003 00:32:26 +0000

bluez-utils (2.2-1) unstable; urgency=low

  * New upstream release
    - support for voice settings in hciconfig
    - updated man pages
    - bug fixes to hcitool
  * Updated standards version to 3.5.8

 -- Edd Dumbill <ejad@debian.org>  Wed,  1 Jan 2003 14:28:29 +0000

bluez-utils (2.1-3) unstable; urgency=low

  * /dev/rfcomm* now chgrp to 'dialout', thanks to Joey Hess for
    pointing this out
  * README.Debian updated to reflect status quo of kernel modules

 -- Edd Dumbill <ejad@debian.org>  Mon,  2 Dec 2002 20:03:42 +0000

bluez-utils (2.1-2) unstable; urgency=low

  * Added directory creation to devfs devices file (thanks Zdzislaw
    A.Kaleta)
  * Fixed chgrp of /dev/rfcomm* to group 'bluetooth'

 -- Edd Dumbill <ejad@debian.org>  Thu, 31 Oct 2002 07:47:44 +0000

bluez-utils (2.1-1) unstable; urgency=low

  * New upstream release
    - adds kernel support for rfcomm
  * Made postinst create correct rfcomm* and vhci devices
    and add a system group 'bluetooth'

 -- Edd Dumbill <ejad@debian.org>  Tue,  8 Oct 2002 17:01:35 +0100

bluez-utils (2.0-release-2) unstable; urgency=low

  * Added modutils alias entries for bnep and rfcomm, which will be
    available in the latest releases of the kernel modules.

 -- Edd Dumbill <ejad@debian.org>  Tue, 08 Oct 2002 16:59:57 +0100

bluez-utils (2.0-release-1) unstable; urgency=low

  * New upstream release
  * Updated maintainer address to my Debian address
  * Updated standards version to 3.5.6
  * Package now updates /etc/modutils/bluez for the BlueZ modules
  * hcid is now stopped and started on an upgrade

 -- Edd Dumbill <ejad@debian.org>  Sat, 31 Aug 2002 20:27:43 +0100

bluez-utils (2.0-pre12-2) unstable; urgency=low

  * Added AM_MAINTAINER_MODE to configure.in (Closes: #154929)
    For more info on why I did this, see
    http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01422.html

 -- Edd Dumbill <edd@usefulinc.com>  Wed, 31 Jul 2002 11:28:30 +0100

bluez-utils (2.0-pre12-1) unstable; urgency=low

  * New upstream release
  * Added TODO list, removed redundant upstream README

 -- Edd Dumbill <edd@usefulinc.com>  Wed, 26 Jun 2002 12:37:26 +0100

bluez-utils (2.0-pre9-5) unstable; urgency=low

  * Added missing build-depends on bison and flex

 -- Edd Dumbill <edd@usefulinc.com>  Sat, 15 Jun 2002 20:19:05 +0100

bluez-utils (2.0-pre9-4) unstable; urgency=low

  * Added build-depends on libglib1.2-dev

 -- Edd Dumbill <edd@usefulinc.com>  Tue, 11 Jun 2002 21:57:00 +0100

bluez-utils (2.0-pre9-3) unstable; urgency=low

  * Moved startup priority to 25, so as to be after pcmcia.

 -- Edd Dumbill <edd@usefulinc.com>  Sun,  5 May 2002 18:33:00 +0100

bluez-utils (2.0-pre9-2) unstable; urgency=low

  * Fixed bluepin to find the running X server properly under Debian.

 -- Edd Dumbill <edd@usefulinc.com>  Sun,  5 May 2002 15:32:00 +0100

bluez-utils (2.0-pre9-1) unstable; urgency=low

  * New upstream version.
  * Follow upstream's versioning conventions.

 -- Edd Dumbill <edd@usefulinc.com>  Thu,  2 May 2002 16:24:00 +0100

bluez-utils (1.99.8-3) unstable; urgency=low

  * Separated out PCMCIA support files into bluez-pcmcia-support.
  * Added --always-pcmcia option to configure script so we can force
    PCMCIA support scripts install.

 -- Edd Dumbill <edd@usefulinc.com>  Fri, 19 Apr 2002 11:36:00 +0100

bluez-utils (1.99.8-2) unstable; urgency=low

  * Fixed killall returning error in init script.

 -- Edd Dumbill <edd@usefulinc.com>  Wed, 17 Apr 2002 01:00:00 +0100

bluez-utils (1.99.8-1) unstable; urgency=low

  * Initial Release.

 -- Edd Dumbill <edd@usefulinc.com>  Wed, 17 Apr 2002 01:00:00 +0100

